lemon-mirror:
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment >> Navigation System >> Inspection >> Check Each Vehicle Signal >> Check Back Sensor

Check Back Sensor

  1. Touch {Vehicle Signal Info.} on the << Dealer Diag Menu >> screen.
  2. Pull the parking brake and depress the brake pedal, then put the gear in reverse.
  3. Make sure that "ON" is displayed in the Reverse item.

    ON: Normal.

    OFF: Abnormal. Check the signal line connection. If there are no problems, the unit could be faulty.

· About lemon-mirror