lemon-mirror:
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> Extension Case >> Assembly

Extension Case: Assembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press-fit the new oil seal using ST and the press.

    ST 498057300 INSTALLER

  2. Press-fit the dust cover.
  3. Insert the transfer clutch assembly, spring retainer, return spring and clutch spring retainer.
    Fig 1: Identifying Transfer Clutch Assembly, Spring Retainer, Return Spring And Clutch Spring Retainer
    G06342951Courtesy of SUBARU OF AMERICA, INC.
  4. Using the ST and compressor, install the snap ring.

    ST 18762AA000 COMPRESSOR SPECIAL TOOL

    Fig 2: Identifying ST 18762AA000 Compressor Special Tool
    G05022295Courtesy of SUBARU OF AMERICA, INC.
  5. Install the transfer clutch. Refer to INSTALLATION , Transfer Clutch.
  6. Install the multi-plate hub assembly.
· About lemon-mirror