lemon-mirror:
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission) >> General Description >> Specification >> Selector Position

Selector Position

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
SELECTOR POSITION SPECIFICATION CHART

P (Park) Transmission is in neutral, output member is immovable, engine start is possible
R (Reverse) Transmission in reverse for backing
N (Neutral) Transmission is in neutral and engine start is possible
D (Drive) Automatic gear change 1st ↔ 2nd ↔ 3rd ↔ 4th ↔ 5th
Manual mode (+) Manual gear change 1st ↔ 2nd ↔ 3rd ↔ 4th ↔ 5th
Manual mode (-) Manual gear change 1st ↔ 2nd ↔ 3rd ↔ 4th ↔ 5th
Control method Wire cable type