Initialize Operation
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
- Tilt up the glass lid.
- Release the switch once, and press the tilt up switch again for 15 seconds.
- When the glass lid is raised a little and returned to tilt up position, release the switch for the moment. (Initialization of position detecting function)
- Holding down the tilt up switch again within 5 seconds from releasing the switch will automatically perform tilt down/slide open/slide close. (When 5 seconds pass, the position detecting function is cancelled.)
- Initialize operation is completed.