lemon-mirror:
Home >> Subaru >> 2012 >> Outback Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Operation

Impact Sensor: Operation

  1. IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
  2. Prepare the Subaru Select Monitor kit.
  3. Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
  4. On << System Selection Menu >> display, select {Integ. unit mode}.
  5. Select {ECM customizing}.
  6. Perform impact sensor ON/OFF setting.
    • Installed: ON
    • Removed: OFF
  7. Perform impact sensor ON/OFF setting.
    • Installed: ON
    • Removed: OFF
  8. Turn the ignition switch to OFF and remove the Subaru Select Monitor.
· About lemon-mirror