Check Relay
- Check the resistance between relay terminals.
Terminal No. Inspection conditions Specification Circuit 1 - 2 Always 1 MΩ or more 1 - 2 Apply battery voltage between 4 - 3 terminals. Less than 1 Ω Terminal No. Inspection conditions Specification Circuit 1 - 2 Always 1 MΩ or more 1 - 4 Always Less than 1 Ω 1 - 2 Apply battery voltage between 3 - 5 terminals. Less than 1 Ω - Replace the relay if the inspection result is not within the standard value.