Section 7 (Clutch System): Flywheel: Installation

WARNING: This page is about a different variant/trim than selected.

Temporarily tighten the flywheel, and attach the ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Installing Flywheel Using Crankshaft Stopper ST
Courtesy of SUBARU OF AMERICA, INC.
Tighten the flywheel mounting bolts to the specified torque.
NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque:

75 N.m (7.6 kgf-m, 55.3 ft-lb)

Fig 2: Identifying Flywheel Bolts Tightening Sequence
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and cover. Refer to INSTALLATION .
Install the transmission assembly. Refer to MANUAL TRANSMISSION ASSEMBLY .