Section 7 (Clutch System): General Description: Specification
WARNING: This page is about a different variant/trim than selected.
| Model | 2.5 L non-turbo | 2.5 L turbo | ||
| Transmission type | 6MT | |||
| Clutch cover | Type | Push type | ||
| Diaphragm set load | N (kgf, lbf) | 5688 (580, 1279) | 7450 (760, 1675) | |
| Clutch disc | Facing material | Woven (Non-asbestos) | ||
| O.D. x I.D. x thickness mm (in) | Flywheel side | 230 x 155 x 3.2 (9.06 x 6.10 x 0.126) | ||
| Clutch cover side | 230 x 155 x 3.5 (9.06 x 6.10 x 0.138) | |||
| Spline outer diameter | mm (in) | 25.2 (0.992), (Number of teeth: 24) | ||
| Depth of rivet head mm (in) | Flywheel side | 1.35 - 1.95 (0.053 - 0.077) | ||
| Clutch cover side | 1.65 - 2.25 (0.065 - 0.089) | |||
| Limit of sinking | 0.3 (0.012) | |||
| Deflection limit | mm (in) | 0.7 (0.028) at R = 110 (4.33) | ||
| Clutch release lever ratio | 1.6 | |||
| Release bearing | Grease-packed self-aligning | |||
| Clutch pedal | Full stroke | mm (in) | 130 - 135 (5.12 - 5.31) 135 - 140 (5.31 - 5.51) | |
| Free play | mm (in) | 4 - 11 (0.16 - 0.43) | ||
| Flywheel | Type | Flexible | ||