lemon-mirror:
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Turbine Speed Sensor 1 >> Installation

Turbine Speed Sensor 1: Installation

  1. Install the turbine speed sensor 1.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb) 

  2. Connect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G05022250Courtesy of SUBARU OF AMERICA, INC.
  3. Lower the vehicle.
  4. Install the front exhaust pipe.
  5. Install the under cover.
  6. Lower the vehicle.
  7. Connect the ground cable to battery.
· About lemon-mirror