lemon-mirror:
Home >> Subaru >> 2013 >> Forester X, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Front Differential Assembly >> Assembly >> Side Retainer

Side Retainer

  1. Install the bearing outer race to the differential side retainer.
  2. Using the ST, install the differential side retainer oil seal by lightly tapping with a plastic hammer.
    CAUTION: Apply differential gear oil to the oil seal lips, and install the oil seal while being careful not to deform the lip.
    NOTE: Use a new oil seal.

    ST 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER

    Fig 1: Installing Differential Side Retainer Oil Seal
    G05002726Courtesy of SUBARU OF AMERICA, INC.
  3. Apply gear oil to the O-ring and install.
    NOTE:
    • Use new O-rings.
    • Apply gear oil to O-ring.
    Fig 2: Identifying Side Retainer O-Ring
    G05002717Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror