Turbo Model

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Temporarily tighten the drive plate and reinforcement drive plate.
Set the ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Identifying Crankshaft Stopper (Turbo Model)
Courtesy of SUBARU OF AMERICA, INC.
Tighten the drive plate mounting bolt in three stages.
1. Tighten the drive plate mounting bolt.
  Tightening torque:
  
  10 N.m (1.0 kgf-m, 7.4 ft-lb)
2. Additionally tighten the drive plate mounting bolts.
  Tightening torque:
  
  40 N.m (4.1 kgf-m, 29.5 ft-lb)
3. While checking the tightening angle with the ST, further tighten the drive plate mounting bolts.
  Tightening angle:
  
  30°±5°
  
  ST 18854AA000 ANGLE GAUGE
Install the transmission assembly to the vehicle. < Refer to INSTALLATION , Automatic Transmission Assembly. >