lemon-mirror:
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Combination Switch (Light) >> Inspection >> Notes

Combination Switch (Light): Inspection: Notes

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the combination switch connector.
  2. Check the resistance between combination switch terminals.
    Fig 1: Identifying Combination Switch Connector And Terminals
    G05022458Courtesy of SUBARU OF AMERICA, INC.
  3. Replace the combination switch (light) if the inspection result of each switch is not within the standard value.
· About lemon-mirror