lemon-mirror:
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic Transaxle) >> Front Differential Assembly >> Assembly >> Side Retainer

Side Retainer

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bearing outer race to the differential side retainer.
  2. Using the ST, install the differential side retainer oil seal by lightly tapping with a plastic hammer.
    CAUTION: Apply differential gear oil to the oil seal lips, and install the oil seal while being careful not to deform the lip.
    NOTE: Use a new oil seal.

    ST 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER

    Fig 1: Installing Differential Side Retainer Oil Seal
    G05002726Courtesy of SUBARU OF AMERICA, INC.
  3. Apply gear oil to the O-ring and install.
    NOTE:
    • Use new O-rings.
    • Apply gear oil to O-ring.
    Fig 2: Identifying Side Retainer O-Ring
    G05002717Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror