lemon-mirror:
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Power Window Control Switch >> Removal >> Main Switch

Main Switch

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the trim panel - front door. <Ref. to FRONT DOOR , REMOVAL, Door Trim.>
  3. Remove the panel - power window main switch.
CAUTION: Be careful not to damage the trim panel - front door with the panel - power window main switch.
  1. Insert a sheet of protective paper (a) between panel - power window main switch and trim panel - front door.
  2. Remove the screws.
    Fig 1: Locating Screws
    G10272704Courtesy of SUBARU OF AMERICA, INC.
  3. Release the claws, and then remove the panel - power window main switch.
    Fig 2: Removing Panel - Power Window Main Switch
    G10272705Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the switch - power window main.
    Fig 3: Removing Switch - Power Window Main
    G10272706Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror