lemon-mirror:
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Entertainment System) >> Audio System >> Operation >> Initialization (Factory Default)

Initialization (Factory Default)

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Model with 6.2 inch display 

  1. Turn the ignition switch to ACC.
  2. Press the HOME button (a) to display the {HOME} screen.
  3. Touch the {SETTINGS} (b) to display the {SETTINGS} screen.
  4. Touch the {Settings General} (c) to display the {Settings General} screen.
  5. Touch the {Restore} (d) in {Reset to Factory Settings}.
    Fig 1: Screen Display - Reset To Factory Settings
    G10309118Courtesy of SUBARU OF AMERICA, INC.
  6. Touch {OK} after {Are you sure you want to delete All Data?} is displayed.
  7. {DO NOT OPERATE. Initializing now.} is displayed, and all data deletion is initiated.
  8. When all data is deleted, {All date has been deleted. Start up the engine to reboot.} is displayed.

    Model with 7 inch display 

    Operation is the same as that of navigation assembly, therefore, refer to "Navigation System". < Ref. to INITIALIZATION (FACTORY DEFAULT) , OPERATION, Navigation System. >

· About lemon-mirror