lemon-mirror:
Home >> Subaru >> 2015 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Cruise Control System) >> Cruise Control Command Switch >> Removal

Cruise Control Command Switch: Removal

WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". < Ref. to CAUTION , General Description. >
  1. Set the tire to the straight-ahead position.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. < Ref. to BATTERY , NOTE, Repair Contents. >
  3. Remove the driver's airbag module. < Ref. to REMOVAL , Driver's Airbag Module. >
  4. Remove the steering wheel. < Ref. to REMOVAL , Steering Wheel. >
  5. Remove the cruise control command switch assembly. < Ref. to DISASSEMBLY , Steering Wheel. >
· About lemon-mirror