lemon-mirror:
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Power Control System) >> Battery Current Sensor >> Installation

Battery Current Sensor: Installation

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery current sensor assembly.
    1. Install the battery current sensor assembly in place.
    2. Tighten the nut.

      Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}

    3. Connect the engine wire to the battery current sensor assembly with the nut.

      Standard value: T=7.5N.m {77kgf.cm} {5.5 ft.lbf}

    4. Connect the connector.
· About lemon-mirror