Tumble Generator Valve Assembly: Removal

Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the intake manifold. < Ref. to REMOVAL , Intake Manifold. >
Disconnect the connector (A) from the tumble generator valve assembly.
Remove the tumble generator valve assembly from the cylinder head.
- RH side
  
  Fig 2: Identifying Tumble Generator Valve Assembly Connector With Bolts (RH Side)
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 3: Identifying Tumble Generator Valve Assembly Connector With Bolts (LH Side)
  Courtesy of SUBARU OF AMERICA, INC.
Remove the cylinder head plate from cylinder head.

Fig 4: Locating Cylinder Head Plate Of Cylinder Head
Courtesy of SUBARU OF AMERICA, INC.