Active Test: Operation

CAUTION: After executing the system operation check mode, execute the Clear Memory Mode. < Ref. to OPERATION , Clear Memory Mode. >

NOTE:

*: After replacing ECM, be sure to perform this procedure.
For detailed operation procedures, refer to "Application help".

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System».
On «Select System» display, select «Engine Control System».
On «Select Function» display, select «Active Test».

SSM display item

Execution condition

Remarks

Fuel Pump Relay

Ignition switch is ON (engine OFF)

Activating the actuator ON/OFF

Activating the fuel pump ON/OFF

ON ←→ OFF

CPC Solenoid Valve

Activating the purge control solenoid valve ON/OFF

ON ←→ OFF

Radiator Fan Relay

Activating the radiator fan relay ON/OFF

ON ←→ OFF

A/C Compressor Relay

Activating the A/C relay ON/OFF

ON ←→ OFF

ELCM switching valve

Activating the ELCM switching valve ON/OFF

ON ←→ OFF

ELCM pump

Activating the ELCM vacuum pump ON/OFF

ON ←→ OFF

OFF Drive

At idling

Fuel pump control

Fuel pump OFF operation

OFF

Fixed Idle Ignition Timing

At idling

Fixing the timing of idle ignition

16.0°⁽¹⁾

Idle Speed Control

At idling

Idle speed control

500 - 2000 rpm

Injection Stop
Mode (Injector 1) Injection Stop
Mode (Injector 2) Injection Stop
Mode (Injector 3) Injection Stop
Mode (Injector 4)

At idling

Injector control

Stopping fuel injection (Cylinder selection)

Injection Stop
Mode (Injector 1) Injection Stop
Mode (Injector 2) Injection Stop
Mode (Injector 3) Injection Stop
Mode (Injector 4)

Injection Quantity Control

At idling

Fuel injection amount control
(All cylinders)

0 - 20%

EGR Valve Control

At idling

EGR control valve control

0 - 255 STEP

Alternator control

At idling

Alternator control (model with Auto Start Stop)

Low mode
Middle mode
High mode

⁽¹⁾	Value may change depending on the idle speed.