lemon-mirror:
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> VDC OFF Switch >> Inspection

VDC OFF Switch: Inspection

  1. Remove the VDC OFF switch. < Ref. to REMOVAL , VDC OFF Switch. >
  2. Measure the resistance between the VDC OFF switch terminals.

    Preparation tool: 

    Circuit tester 

    Fig 1: Identifying VDC OFF Switch Connector Terminals
    G10297697Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    5 - 6 Switch OFF 1 MΩ or more
    Switch ON Less than 1 Ω
    NOTE: Replace the VDC OFF switch if the inspection result is not within the standard value.
  3. Install the VDC OFF switch. < Ref. to REMOVAL , VDC OFF Switch. >
· About lemon-mirror