lemon-mirror:
Home >> Subaru >> 2017 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Key Warning System >> Key warning system >> Data monitor/active test

Data monitor/active test

  1. Read data list
    CAUTION: The values indicated under the normal conditions in the table below are informative values. Do not depend on reference value only when judging if the part is faulty.
    NOTE: By using the SSM4 for reading the data list, it is able to read the values and the status of the switches, sensors, or actuators without removing these parts. This inspection is very useful because it allows an operator to read any intermittent conditions or signals without disturbing parts or wiring. Diagnostic time can be saved by reading the data monitor information at the initial stage of the troubleshooting.
    1. Turn IG SW to OFF.
    2. Connect the SSM4 to the DLC3.
    3. Turn IG SW to ON.
    4. Turn on the SSM4.
    5. Enter the following menu. [Body Control] →[Data monitor]
    6. Using SSM4, read the data list according to the screen displays.
    MAIN BODY DESCRIPTION

    Item Name Description/display range Normal condition Remarks
    [Ignition] Ignition switch signal/ON or OFF OFF: IG SW OFF
    ON: IG SW ON    		 -
    [ACC SW] Ignition switch ACC signal/ON or OFF OFF: IG SW OFF
    ON: IG SW ACC    		 -
    [Key Unlock Warning SW] Unlock warning switch/OFF or ON OFF: Ignition key is not inserted
    ON: Ignition key is inserted    		 -
    [D Door Courtesy] Driver's door courtesy light switch signal/ON or OFF ON: Driver's door is open
    OFF: Driver's door is closed    		 -
· About lemon-mirror