lemon-mirror:
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Fuel Pump Control Unit >> Removal

Fuel Pump Control Unit: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the trunk trim panel assembly - side on the RH side. (Sedan model) <Ref. to REMOVAL , Rear Quarter Trim.>
  3. Remove the right side rear quarter trim. (OUTBACK model) <Ref. to REMOVAL , Rear Quarter Trim.>
  4. Remove the fuel pump control unit.
    • Sedan model
      Fig 1: Locating Fuel Pump Control Unit Nut - Sedan Model
      G10263647Courtesy of SUBARU OF AMERICA, INC.
    • OUTBACK model
    Fig 2: Locating Fuel Pump Control Unit Nut - OUTBACK Model
    G10263648Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump control unit.
Fig 3: Locating Fuel Pump Control Unit Connector
G10263649Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror