lemon-mirror:
Home >> Subaru >> 2017 >> Outback 3.6R Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Oil Flow Control Solenoid Valve >> Removal >> Intake Side

Intake Side

  1. Remove the collector cover.
    1. Carefully pull up the rear of collector cover at two positions (A).
    2. Carefully pull up the front of collector cover at two positions (B) while moving it forward.
    Fig 1: Removing Collector Cover
    G11585612Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  3. Disconnect the connector (A) from the intake oil flow control solenoid valve, and remove the intake oil flow control solenoid valve.
    • RH side
      Fig 2: Locating Intake Oil Flow Control Solenoid Valve Bolt With Connector - RH Side
      G10263618Courtesy of SUBARU OF AMERICA, INC.
    • LH side
    Fig 3: Locating Intake Oil Flow Control Solenoid Valve Bolt With Connector - LH Side
    G10263619Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror