Main Switch

Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. <Ref. to BATTERY , NOTE, Note.>
NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
Remove the trim panel - front door. <Ref. to FRONT DOOR , REMOVAL, Door Trim.>
Remove the panel - power window main switch.
CAUTION: Be careful not to damage the trim panel - front door with the panel - power window main switch.
1. Insert a sheet of protective paper (a) between panel - power window main switch and trim panel - front door.
2. Remove the screws and disconnect the connector.
  
  Fig 1: Locating Power Window Main Switch And Trim Panel Screws
  Courtesy of SUBARU OF AMERICA, INC.
3. Release the claws, and then remove the panel - power window main switch.
  
  Fig 2: Removing Power Window Main Switch Panel
  Courtesy of SUBARU OF AMERICA, INC.
4. Release the claws, and then remove the switch - power window main.
  
  Fig 3: Power Window Main Switch Claws Location
  Courtesy of SUBARU OF AMERICA, INC.