lemon-mirror:
Home >> Subaru >> 2018 >> BRZ tS >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Battery Sensor >> Installation

Battery Sensor: Installation

  1. Installation of battery sensor ASSY
    1. Install the battery sensor ASSY in place.
    2. Tighten the nut.

      Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf} 

    3. Connect the engine wire to the battery sensor ASSY with the nut.

      Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf} 

    4. Connect the connector.
· About lemon-mirror