lemon-mirror:
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Installation >> Stabilizer

Front Suspension System And Wheel Alignment: Stabilizer: Installation: Stabilizer

  1. Install the clamp - stabilizer bushing.

    Tightening torque: 

    25 N.m (2.5kgf-m, 18.4ft-lb) 

  2. Install the stabilizer link (bottom part).

    Tightening torque: 

    60 N.m (6.1kgf-m, 44.3ft-lb) 

  3. Install the front exhaust pipe. Ref. to EXHAUST (H4DO)>Front Exhaust Pipe>INSTALLATION .
  4. Install the crossmember support - rear.

    Tightening torque: 

    70 N.m (7.1kgf-m, 51.6ft-lb) 

  5. Install the under cover - front.

    Tightening torque: 

    18 N.m (1.8kgf-m, 13.3ft-lb) 

· About lemon-mirror