lemon-mirror:
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Windows >> Window Glass & Mirrors >> Power Window Control Switch >> Installation >> Main Switch

Main Switch

CAUTION:
  • After installing the switch - power window main, always perform the initial setting.

    Failure to do so may cause the improper activation of auto-reverse operation for pinching hazard prevention.

  • Use protective paper to avoid damage to the trim panel.
  1. Install the panel - power window main switch to the trim panel - front door.
  2. Install the trim panel - front door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. Perform initial setting operation (reset operation A). Ref. to GLASS/WINDOWS/MIRRORS>Power Window System>OPERATION>RESET OPERATION A .
· About lemon-mirror