lemon-mirror:
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) (H4DO) >> Drive Cycle >> Procedure >> Drive Cycle X

Drive Cycle X

DTC Item Condition Number of driving cycles on the detecting condition
P2004 TGV CONTROL STUCK OPEN BANK 1 - 1
P2005 TGV CONTROL STUCK OPEN BANK 2 - 1
P2006 TGV CONTROL STUCK CLOSED BANK 1 - 1
P2007 TGV CONTROL STUCK CLOSED BANK 2 - 1

Diagnostic procedure: 

  1. Using the Subaru Select Monitor, perform the clear memory for «Engine». Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Clear Memory Mode>OPERATION 
  2. Idle the engine for 10 seconds or more after engine start.
  3. Shift the select lever to "P" range, and race the engine for 10 seconds or more.
    NOTE: Keep the engine speed at 3500 rpm or more.
  4. Read the temporary code using the Subaru Select Monitor or general scan tool. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Read Diagnostic Trouble Code (DTC)>OPERATION 
· About lemon-mirror