lemon-mirror:
Home >> Subaru >> 2018 >> WRX Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System (Except For STI) >> Throttle Body >> Removal

Throttle Body: Removal

  1. Remove the collector cover. Ref. to INTAKE (INDUCTION) (EXCEPT FOR STI)>Collector Cover>REMOVAL .
  2. Disconnect the ground terminal from battery sensor. Ref. to NOTE>BATTERY .
  3. Lift up the vehicle.
  4. Remove the under cover. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
  5. Drain approximately 3.0 L (3.2 US qt, 2.6 Imp qt) of coolant. Ref. to COOLING (EXCEPT FOR STI)>Engine Coolant>REPLACEMENT>DRAINING OF ENGINE COOLANT .
  6. Remove the intercooler. Ref. to INTAKE (INDUCTION) (EXCEPT FOR STI)>Intercooler>REMOVAL .
  7. Remove the intake duct No. 3. Ref. to INTAKE (INDUCTION) (EXCEPT FOR STI)>Intake Duct>REMOVAL>INTAKE DUCT NO. 3 .
  8. Disconnect the connector (A) from the throttle position sensor, and disconnect the preheater hose (B) from the throttle body.
    G10266071
  9. Remove the throttle body from the intake manifold.
    G10266072
· About lemon-mirror