Wheel Alignment: Inspection: Camber

Place the front wheel on the turning radius gauge.
NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
Set the adapter into the center of wheel, and then set the wheel alignment gauge.

Measure the camber angle in accordance with the operation service information for wheel alignment gauge.

MODEL	TIRE SIZE	CAMBER (DIFFERENCE BETWEEN RH AND LH 45' OR LESS)
WRX model	235/45R17	-0°45' ± 0°45'
WRX model	245/40R18
STI model	245/40R18 245/35R19