STI Model
REAR SUSPENSION SYSTEM AND WHEEL ALIGNMENT SPECIFICATION
| Tire Size | 245/40R18 245/35R19 |
||
| Wheel Arch Height (Tolerance: +12 mm-24 mm (+0.47 in-0.94 in )) |
mm (in) | 362 (14.25) | |
| Camber (tolerance: ± 0°45' Differences between RH and LH: 45' or less) | -1°40' | ||
| Toe-in | mm (in) | IN3 ± 3 (IN0.12 ± 0.12) | |
| Toe angle (sum of both wheels): IN0°16' ± 16' | |||
| Thrust Angle (tolerance: 0°00' ± 30') | 0°00' | ||
NOTE:
- Adjust with the value less than the inspection value, taking aging variation into consideration.
- Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds the tolerance range of the specification chart.
- Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart cannot be adjusted.
- If other items exceed the tolerance range of the specification chart, check the suspension parts and connections for deformation. If defective, replace with new parts.
A - B = Positive: Toe-in, Negative: Toe-out
a = Individual toe angles