lemon-mirror:
Home >> Subaru >> 2019 >> Crosstrek Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (HEV) >> Oil Control Solenoid >> Installation >> Intake

Oil Control Solenoid: Installation: Intake

• RH SIDE 

  1. Install the backup ring to the oil control solenoid.
  2. Using a new O-ring, install the oil control solenoid.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  3. Connect the connector.
  4. Install the air intake duct. Refer to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>INSTALLATION .
  5. Connect the battery ground terminal. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .

• LH SIDE 

  1. Install the backup ring to the oil control solenoid.
  2. Using a new O-ring, install the oil control solenoid.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  3. Connect the connector.
  4. Connect the battery ground terminal. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
· About lemon-mirror