lemon-mirror:
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Inhibitor Switch >> Removal

Inhibitor Switch: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Release the shift lock using a screwdriver, etc. and shift the select lever to the "N" range.
    G13225109Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the select cable from the transmission body.
    CAUTION: Do not apply excessive load while holding the part (a).
    G12392796Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the spring pin (A) and remove the shifter arm (B).
    G13225674Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector and remove the inhibitor switch.
    G13225675Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror