Rear Suspension System: Stabilizer: Installation: Stabilizer

Before installation, inspect the following items and replace any faulty part with a new one.
- Check the rubber bushing stabilizer rear for abnormal cracks, fatigue or damage.
- Check the stabilizer link rear for damage.
Install the clamp stabilizer.
Tightening torque:

38 N.m (3.9 kgf-m, 28.0 ft-lb)
Install the stabilizer link rear.
Tightening torque:

Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to REAR SUSPENSION>GENERAL DESCRIPTION>COMPONENT>REAR SUSPENSION .
Install the rear exhaust pipe. Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>INSTALLATION .
Install the rear wheels and lower the vehicle.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)