lemon-mirror:
Home >> Subaru >> 2020 >> Ascent Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

  1. Start and warm up the engine.
  2. Shift the select lever to "P" or "N" range.
  3. Depress the brake pedal and hold it.
  4. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Ref. to TRANSMISSION (DIAGNOSTICS)>DATA MONITOR>OPERATION .

    Specification: 

    Approx. 0.8 V

  5. Check "secondary pressure sensor voltage" with engine stopped and ignition switch turned on by using Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DATA MONITOR>OPERATION .

    Specification: 

    Approx. 0.5 V

· About lemon-mirror