lemon-mirror:
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Cockpit Display >> Installation >> Deck Assembly

Deck Assembly

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Install the deck cord.
  2. Install the cover center side RH. Refer to EXTERIOR/INTERIOR TRIM>Center Console>INSTALLATION .
  3. Install the center information display assembly and the ornament panel mid passenger. Refer to ENTERTAINMENT & MONITORING>Cockpit Display>INSTALLATION>DISPLAY ASSEMBLY .
  4. Install the cover assembly front. Refer to EXTERIOR/INTERIOR TRIM>Console Box>INSTALLATION .
  5. Install the grip and boot. Refer to CONTROL SYSTEMS>Select Lever>INSTALLATION .
  6. Install the driver monitoring unit assembly or the cover center UPR. Refer to INSTRUMENTATION/DRIVER INFO>Driver Monitoring Unit>INSTALLATION .
  7. Install the visor assembly. Refer to INSTRUMENTATION/DRIVER INFO>Combination Meter>INSTALLATION .
  8. Install the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>INSTALLATION .
  9. Install the deck assembly. Refer to EXTERIOR/INTERIOR TRIM>Console Box>ASSEMBLY .
  10. Install the console box assembly and the cover assembly front. Refer to EXTERIOR/INTERIOR TRIM>Console Box>INSTALLATION .
  11. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: After connecting the ground terminal to the battery sensor, place the select lever in the "P" position.
· About lemon-mirror