lemon-mirror:
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> External Connection Terminal >> Installation >> Front

External Connection Terminal: Installation: Front

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Install the AUX unit assembly and AUX cord.
  2. Install the panel instrument passenger and pocket COMPL. Refer to EXTERIOR/INTERIOR TRIM>Glove Box>INSTALLATION .
  3. Install the center information display assembly and the ornament panel mid passenger. Refer to ENTERTAINMENT & MONITORING>Cockpit Display>INSTALLATION>DISPLAY ASSEMBLY .
  4. Install the cover assembly front. Refer to EXTERIOR/INTERIOR TRIM>Console Box>INSTALLATION .
  5. Install the grip and boot. Refer to CONTROL SYSTEMS>Select Lever>INSTALLATION .
  6. Install the driver monitoring unit assembly or the cover center UPR. Refer to INSTRUMENTATION/DRIVER INFO>Driver Monitoring Unit>INSTALLATION .
  7. Install the visor assembly. Refer to INSTRUMENTATION/DRIVER INFO>Combination Meter>INSTALLATION .
  8. Install the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>INSTALLATION .
  9. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: After connecting the ground terminal to the battery sensor, place the select lever in the "P" position.
· About lemon-mirror