lemon-mirror:
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Stabilizer >> Installation >> Stabilizer Bushing

Stabilizer Bushing

  1. Before installation, inspect the following items and replace any faulty part with a new one. Check the rubber bushing stabilizer rear for abnormal cracks, fatigue or damage.
  2. Install the rubber bushing stabilizer rear.
  3. Install the clamp stabilizer.

    Tightening torque: 

    38 N.m (3.9 kgf-m, 28.0 ft-lb)

· About lemon-mirror