lemon-mirror:
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Installation >> Stabilizer Link

Stabilizer Link

  1. Before installation, inspect the following items and replace any faulty part with a new one. Check the stabilizer link front for damage.
  2. Install the stabilizer link front.

    Tightening torque: 

    60 N.m (6.1 kgf-m, 44.3 ft-lb)

  3. Lower the vehicle, and install the front wheels.

    Tightening torque: 

    120 N.m (12.2 kgf-m, 88.5 ft-lb)

· About lemon-mirror