Inspection Mode G

Diagnostic procedure:

1. Start the engine.
2. Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is not completed. Refer to TRANSMISSION (DIAGNOSTICS)>All Readiness Diagnostic Code(s) .
3. Depress the brake pedal and move the select lever to each range at an interval of five seconds.
   NOTE: Move the select lever in the following order: "P" → "R" → "N" → "D".
4. Drive for three seconds at 16 km/h (10 MPH).
   NOTE: Drive in "D" range and "R" range.
5. Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is completed. Refer to TRANSMISSION (DIAGNOSTICS)>All Readiness Diagnostic Code(s) .