Inspection Mode I
| DTC | Item | Condition |
|---|---|---|
| P2714 | PRESSURE CONTROL SOLENOID "D" PERFORMANCE/STUCK OFF | Perform inspection mode I twice |
Diagnostic procedure:
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed.
- Start the engine under condition that ATF temperature is at 60°C (140°F) or more and less than 80°C (176°F).
- Drive for 30 seconds at a constant speed of 70 km/h (44 MPH) with the engine speed at 1200 rpm.