Front Suspension System And Wheel Alignment: Stabilizer: Installation: Stabilizer

Set the stabilizer to the vehicle in the reverse order of removal, and install the clamp - stabilizer.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the stabilizer link (bottom part).
Tightening torque:

60 N.m (6.1 kgf-m, 44.3 ft-lb)
Install the front exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>INSTALLATION .
Install the crossmember support - rear.
Tightening torque:

70 N.m (7.1 kgf-m, 51.6 ft-lb)
Install the under cover - front.
Tightening torque:

18 N.m (1.8 kgf-m, 13.3 ft-lb)