Stabilizer Bushing
- Before installation, inspect the following items and replace any faulty part with a new one. Check the stabilizer bushing for abnormal cracks, fatigue or damage.
- Install the bushing - stabilizer.
- Install the clamp - stabilizer bushing.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the front exhaust pipe. Ref. to EXHAUST (H4DO (EXCEPT FOR HEV))>FRONT EXHAUST PIPE>INSTALLATION .
- Install the crossmember support - rear.
Tightening torque:
70 N.m (7.1 kgf-m, 51.6 ft-lb)
- Install the under cover - front.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)