lemon-mirror:
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Relay and Fuse >> Inspection >> Check Relay

Check Relay

  1. Check the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    1 - 3 Always 1 MΩ or more
    G13592968Courtesy of SUBARU OF AMERICA, INC.
    1 - 3 Apply battery voltage between terminals 2 and 4. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
· About lemon-mirror