lemon-mirror:
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Stabilizer >> Installation >> Stabilizer Bushing

Stabilizer Bushing

  1. Before installation, inspect the following items and replace any faulty part with a new one. Check the bushing stabilizer rear for abnormal cracks, fatigue or damage.
  2. Install the bushing stabilizer rear.
  3. Install the clamp stabilizer.

    Tightening torque: 

    30 N.m (3.1 kgf-m, 22.1 ft-lb)

  4. Install the bracket COMPL stabilizer.
    CAUTION: To prevent damage to the vehicle body, place a cloth, etc. between the bracket COMPL stabilizer and the vehicle body. After tightening nuts to specified torque, be sure to remove the cloth, etc.

    Tightening torque: 

    35 N.m (3.6 kgf-m, 25.8 ft-lb)

  5. Install the rear wheels and lower the vehicle.

    Tightening torque: 

    120 N.m (12.2 kgf-m, 88.5 ft-lb)

· About lemon-mirror