Data Monitor: List
| Item | Contents | Standard | Note |
|---|---|---|---|
| Battery Voltage | Battery voltage is displayed. | 0 - 25.5 V | - |
| Ignition Switch | Ignition switch status is displayed. | ON: When ignition switch is ON OFF: When ignition switch is OFF |
- |
| Set SW | Status of the set switch in seat memory switch is displayed. | ON: When set switch is ON OFF: When set switch is OFF |
- |
| Memory SW1 | Status of the memory switch 1 in seat memory switch is displayed. | ON: When memory switch 1 is ON OFF: When memory switch 1 is OFF |
- |
| Memory SW2 | Status of the memory switch 2 in seat memory switch is displayed. | ON: When memory switch 2 is ON OFF: When memory switch 2 is OFF |
- |
| Slide SW | Status of the slide switch in power seat switch is displayed. | OFF: When slide switch is OFF FRONT: When slide switch (forward) is ON REAR: When slide switch (rearward) is ON Abnormal: Abnormal |
- |
| Reclining SW | Status of the reclining switch in power seat switch is displayed. | OFF: When reclining switch is OFF FRONT: When reclining switch (forward) is ON REAR: When reclining switch (backward) is ON Abnormal: Abnormal |
- |
| Lifter SW | Status of the lifter switch in power seat switch is displayed. | OFF: When lifter switch is OFF UP: When lifter switch (up) is ON DOWN: When lifter switch (down) is ON Abnormal: Abnormal |
- |
| Tilt SW | Status of the tilt switch in power seat switch is displayed. | OFF: When tilt switch is OFF UP: When tilt switch (up) is ON DOWN: When tilt switch (down) is ON Abnormal: Abnormal |
- |
| Pulse Power Circuit | Motor pulse sensor power supply circuit status is displayed. | Normal: At normal condition Abnormal: Abnormal |
- |
| Slide Output | Power seat control module output status is displayed. (Slide motor) | OFF: When set to OFF FRONT: When moved forward REAR: When moved rearward |
- |
| Reclining Output | Power seat control module output status is displayed. (Reclining motor) | OFF: When set to OFF FRONT: When moved forward REAR: When moved rearward Abnormal: Abnormal |
- |
| Lifter Output | Power seat control module output status is displayed. (Lifter motor) | OFF: When set to OFF UP: When moved upward DOWN: When moved downward Abnormal: Abnormal |
- |
| Tilt Output | Power seat control module output status is displayed. (Tilt motor) | OFF: When set to OFF UP: When moved upward DOWN: When moved downward Abnormal: Abnormal |
- |
| Memory SW1 Memorized | Registration status of the memory switch 1 in seat memory switch | Yes: When registered No: When not registered |
- |
| Memory SW2 Memorized | Registration status of the memory switch 2 in seat memory switch | Yes: When registered No: When not registered |
|
| Keyless Access and Start Link 1 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
Seat memory operates when the key No. displayed in the Keyless Access Key Information is registered in the item shown on the left. |
| Keyless Access and Start Link 2 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
|
| Keyless Access and Start Link 3 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
|
| Keyless Access and Start Link 4 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
|
| Keyless Access and Start Link 5 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
|
| Keyless Access and Start Link 6 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
|
| Keyless Access and Start Link 7 Memorized | Registration status of keyless access key | Yes: When registered No: When not registered |
|
| Keyless Access Key Information | Key No. currently identified by the vehicle is displayed. | Without: When there is no registered key Keyless Access and Start Link 1: When the registered key No. 1 is detected Keyless Access and Start Link 2: When the registered key No. 2 is detected Keyless Access and Start Link 3: When the registered key No. 3 is detected Keyless Access and Start Link 4: When the registered key No. 4 is detected Keyless Access and Start Link 5: When the registered key No. 5 is detected Keyless Access and Start Link 6: When the registered key No. 6 is detected Keyless Access and Start Link 7: When the registered key No. 7 is detected |
- |
| Slide Position | Slide motor position is displayed. | -32768 - 32767 | - |
| Reclining Position | Reclining motor position is displayed. | -32768 - 32767 | - |
| Lifter Position | Lifter motor position is displayed. | -32768 - 32767 | - |
| Tilt Position | Tilt motor position is displayed. | -32768 - 32767 | - |
| Ignition Signal | Ignition switch CAN signal is displayed. | ON: When ignition switch is ON OFF: When ignition switch is OFF |
- |
| Ignition SW Signal | Ignition switch direct line signal is displayed. | ON: When ignition switch is ON OFF: When ignition switch is OFF |
|
| Seat back setting | Seat retraction setting status is displayed. | ON: When seat retraction setting is ON OFF: When seat retraction setting is OFF |
- |
| ACC SW | Statuses of ACC switch CAN signal and direct line signal are displayed. | OFF: When ACC switch is OFF Mismatch: When ACC switch signal does not match ON: When ACC switch is ON |
- |
| ACC Signal | ACC SW CAN signal is displayed. | ON: When ACC switch is ON OFF: When ACC switch is OFF |
- |
| ACC SW Signal | Ignition switch direct line signal is displayed. | ON: When ACC switch is ON OFF: When ACC switch is OFF |
- |
| Brake Lamp SW Signal | Brake light SW status is displayed. | ON: When brake light switch is ON OFF: When brake light switch is OFF |
- |
| Smart Key Adoption | Presence/absence signal of keyless access with push button start is displayed. | Not Smart: Without keyless access with push button start Smart: With keyless access with push button start |
- |
| MT/AT Signal | MT/AT signal is displayed. | MT: MT model AT: Other than MT model |
- |
| Parking Break Switch Signal | Parking brake switch signal is displayed. | ON: When parking brake switch is ON OFF: When parking brake switch is OFF |
- |
| EPB Status Signal | Electronic parking brake status signal is displayed. | ERROR: When electronic parking brake error occurs Release: When electronic parking brake is released Operate: When electronic parking brake is operated Operating: While electronic parking brake is being operated Releasing: While electronic parking brake is being released Dynamic Parking: When electronic parking brake is in dynamic parking operation |
- |
| Shift Position Signal | Shift position signal is displayed. | D: When shift position is in D N: When shift position is in N R: When shift position is in R P: When shift position is in P L: When shift position is in L |
- |
| Vehicle Speed Signal | Vehicle speed signal is displayed. | 0 - 3986.34 km/h (MPH) | - |
| Remote Engine Starter Status Signal | Remote control engine starter signal is displayed. | ON: When remote control engine starter is ON OFF: When remote control engine starter is OFF |
- |
| Driver's Door Open Status Signal | Driver's door open/close signal is displayed. | Open: When driver's door is open Close: When driver's door is closed |
- |
| Customize Change Request Signal: Seat Back Function | Seat retraction function change request signal is displayed. | Not Required: Seat retraction function change is not requested Required: Seat retraction function change is requested |
- |
| Current User | The current customize setting user is displayed. | Indefinite: Unregistered user MemorySW1: Seat memory SW1 user MemorySW2: Seat memory SW2 user MemorySW3: Seat memory SW3 user KEY1: Keyless access link 1 user KEY2: Keyless access link 2 user KEY3: Keyless access link 3 user KEY4: Keyless access link 4 user KEY5: Keyless access link 5 user KEY6: Keyless access link 6 user KEY7: Keyless access link 7 user DriverMonitorSystem1: DMS1 user DriverMonitorSystem2: DMS2 user DriverMonitorSystem3: DMS3 user DriverMonitorSystem4: DMS4 user DriverMonitorSystem5: DMS5 user |
- |
| Seat Slide Target Position | Seat slide target position is displayed. | -32768 - 32767 | - |
| Seat Reclining Target Position | Seat reclining target position is displayed. | -32768 - 32767 | - |
| Seat Lifter Target Position | Seat lifter target position is displayed. | -32768 - 32767 | - |
| Seat Tilt Target Position | Seat tilt target position is displayed. | -32768 - 32767 | - |
| Door Lock/Unlock Output Signal | Door lock/unlock signal is displayed. |
|
- |
| Customize Change Request Signal: Seat Function Reset | Sheet customization reset request signal is displayed. | Not Required: When reset is not requested Required: When reset is requested |
- |
| MT Reverse Switch Signal | MT vehicle reverse switch signal is displayed. | ON: When reverse switch is ON OFF: When reverse switch is OFF |
- |
| ID REGIST FLAG | ID setting signal is displayed. | DEFAULT: Default No Definition: Undefined state ID Registration: ID registered state ID Customize Editing: Customization registered state ID Delete Select: Selected ID deleted state Customize Delete Select: Selected customization deleted state ID Delete All: All IDs are deleted |
- |
| DRIVER REGIST ID | Driver ID is displayed. | DEFAULT: Default ID1: ID1 user ID2: ID2 user ID3: ID3 user ID4: ID4 user ID5: ID5 user No Definition: Undefined ALL ID: All users Identifying: ID recognition in-progress |
- |
| DMS Recognition Status | Personal recognition status is displayed. | OFF: Personal recognition OFF status ON: Personal recognition ON status |
- |
| DMS 1 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS1 memory is present No: DMS1 memory is not present |
- |
| DMS 2 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS2 memory is present No: DMS2 memory is not present |
- |
| DMS 3 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS3 memory is present No: DMS3 memory is not present |
- |
| DMS 4 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS4 memory is present No: DMS4 memory is not present |
- |
| DMS 5 Memorized | Presence or absence of DMS memory is displayed. | Yes: DMS5 memory is present No: DMS5 memory is not present |
- |
| Customize Flag | Customized setting status is displayed. | DEFAULT: Initial value Customize Present: Customization is being performed Customize Complete: Customization completed state Customize Fail: Customization failed state |
- |
| Seat Position Gap | Slide, reclining, lifter, lifter and tilt position deviation information is displayed. | Yes: Position is deviated No: Position is not deviated |
- |
| Slide Position Gap | Slide position deviation information is displayed. | Yes: Position is deviated No: Position is not deviated |
- |
| Reclining Position Gap | Reclining position deviation information is displayed. | Yes: Position is deviated No: Position is not deviated |
- |
| Lifter Position Gap | Lifter position deviation information is displayed. | Yes: Position is deviated No: Position is not deviated |
- |
| Tilt Position Gap | Tilt position deviation information is displayed. | Yes: Position is deviated No: Position is not deviated |
- |