lemon-mirror:
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> Relay And Fuse >> Inspection >> Check Relay

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    3 - 1 Always 1 MΩ or more
    G13621302Courtesy of SUBARU OF AMERICA, INC.
    3 - 5 Always Less than 1 Ω
    3 - 1 Apply battery voltage between terminals 4 and 2. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
· About lemon-mirror