Variant Work: Notes

Perform when replacing the combination meter assembly.

When communication with Subaru Select Monitor is possible ([Read and store the ECM setting information] is workable): Perform the operation procedure A.
When communication with Subaru Select Monitor is possible ([Read and store the ECM setting information] is not workable): Perform the operation procedure B.

NOTE:

If an error is displayed during the work, click the [OK] button and perform the variant work again.
When odometer value reading is performed, the odometer displays "--" and continued use of the combination meter assembly is impossible.
When the odometer writing operation is completed correctly, the odometer value is automatically cleared from the Subaru Select Monitor.