lemon-mirror:
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> Electrical >> Horns >> Horn System >> Relay And Fuse >> Inspection >> Check Relay

Check Relay

  1. Check the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    1 - 2 Always 1 MΩ or more
    G06653408Courtesy of SUBARU OF AMERICA, INC.
    1 - 2 Apply battery voltage between terminals 4 and 3. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
· About lemon-mirror