lemon-mirror:
Home >> Subaru >> 2021 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (2.4L)) >> Fuel Pump Control Unit >> Removal

Fuel Pump Control Unit: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel trunk side RH. (Sedan model) Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>REMOVAL .
  3. Remove the trim panel assembly apron RH. (OUTBACK model) Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>REMOVAL .
  4. Remove the fuel pump control unit.
    • Sedan model
      G13948422Courtesy of SUBARU OF AMERICA, INC.
    • OUTBACK model
    G13948423Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump control unit.
G13948424Courtesy of SUBARU OF AMERICA, INC.
· About lemon-mirror